Twin Fin Kit

TWIN FIN KIT

Bringing back the old school!
Allows dropknee and standup riders to hold an edge and really crank out your bottom turns.They are mallaeable so you can use a sharp knife to customize your own shape (at your own risk).

Included are:

• 2 Skegs/Fins
• 4 screws

To install, simply punch 4 holes through your board and push the 4 screws through the deck to connect and screw into the skegs on the bottom.

Specs:
Distance between screw holes on skeg: 4 inches

Skeg length from front to back along the base: 5 inches
Skeg height from base to tip: 3.5 inches
Screw length: 2 inches
Maximum board thickness these will work with: 2.75 inches

If you have a board thicker than this, please contact us via email or phone for an alternative.